- MM2 of The Locust objectives are easiest when grouped by location, combat role, and completion condition.
- Start with visible goals before attempting objectives that require exploration, timing, or specific interactions.
- Track every requirement after each encounter so partial progress is not mistaken for completion.
- Use safe routes when an objective involves carrying resources, surviving attacks, or returning to a marked area.
- Review the objective text whenever a mission appears stuck, especially after switching areas or game modes.
MM2 of The Locust Objectives Explained
MM2 of The Locust objectives are best approached as a sequence of measurable tasks rather than one long mission list. Each objective normally asks you to reach a location, interact with an object, defeat a threat, collect something, survive an event, or complete several conditions in one run.
The important distinction is between progress objectives and completion objectives. A progress objective may advance after one action, while a completion objective may require you to finish the entire chain and return to the correct marker. Always read the final line of an objective before leaving an area.
| Objective Type | Typical Requirement | Best First Action | Main Risk |
|---|---|---|---|
| Location | Reach a marked area | Open the map and identify the shortest safe route | Entering the wrong zone |
| Interaction | Use an object or NPC | Search the marked location carefully | Missing the interaction prompt |
| Combat | Defeat a target or group | Prepare health and damage options | Starting without resources |
| Collection | Find or carry items | Check nearby paths and side rooms | Losing the item before delivery |
| Survival | Remain active for a period | Choose a defensible position | Leaving the required area early |
Treat every objective as a checklist of conditions. Reaching the correct location is not enough if the mission also requires an interaction, defeat, delivery, or return step.
Read
Identify the action, target, location, and any time or survival requirement before moving.
Prepare
Carry the tools, healing items, or combat options needed for the objective category.
Complete
Perform the required action and watch for a progress update or completion message.
Confirm
Check the objective tracker before starting another task or changing areas.
How to Prioritize Mission Objectives
Efficient objective routing begins with grouping tasks that take place in the same area. Completing nearby objectives together reduces unnecessary travel and gives you more opportunities to learn the local layout. This is especially useful when an objective sends you between a central hub and a dangerous outer zone.
Use a simple priority system: short objectives first, location-based objectives second, and high-risk objectives last. Short tasks provide quick progress and may unlock additional markers. Location-based tasks can then be combined into one route. High-risk tasks should be attempted after you understand enemy positions, escape paths, and return requirements.
| Priority | Objective Profile | Recommended Timing | Reason |
|---|---|---|---|
| High | Nearby interaction or delivery | Early in the run | Low travel cost and quick progress |
| Medium | Exploration or collection | After nearby tasks | Benefits from route knowledge |
| Medium | Standard combat objective | After preparation | Requires reliable resources |
| Low | Long survival or multi-stage task | When fully prepared | Failure can waste the most time |
Read the Full Objective
Identify every verb in the description, such as reach, collect, defeat, activate, survive, or return. Multiple verbs usually indicate a chained objective rather than a single action.
Mark the Destination
Find the relevant area, landmark, or objective marker before leaving the hub. If the destination is unclear, inspect nearby paths first instead of committing to a long route.
Group Nearby Tasks
Check whether another active objective uses the same zone. Complete compatible tasks in one trip, but avoid carrying a valuable item through unnecessary combat.
Confirm Completion
Wait for the tracker, notification, or objective marker to update. If no update appears, revisit the interaction point and check whether a final return step is required.
The fastest route is not always the shortest route. A slightly longer path with fewer encounters can preserve resources and improve the chance of completing the objective in one attempt.
A useful route has three parts:
- Departure point: where you begin the objective.
- Action zone: where the interaction, combat, or collection task occurs.
- Return point: where the game confirms delivery or mission completion.
Writing these three points down, even briefly, prevents a common mistake: completing the central action and leaving before the objective is formally turned in.
Combat and Survival Objective Strategy
Combat objectives should be handled with control rather than speed. Before engaging, identify whether the objective requires a specific target, a number of defeats, or survival inside a restricted area. Defeating unrelated enemies may help with general progression, but it may not advance the active objective.
For difficult encounters, use the environment to separate targets. Move around corners, doorways, elevation changes, and other obstacles to limit how many enemies can attack at once. Keep an escape route open, and avoid beginning a combat objective when your health or essential resources are already low.
| Combat Situation | Safer Approach | Avoid |
|---|---|---|
| Single target | Pull the target away from nearby threats | Fighting inside a crowded area |
| Multiple targets | Separate enemies and defeat them in small groups | Remaining surrounded |
| Survival timer | Choose cover with more than one exit | Standing in an exposed center |
| Escort or delivery | Clear the route before carrying the item | Taking unnecessary detours |
| Repeated attempts | Improve one weakness after each failure | Repeating the same route unchanged |
Do not assume that a combat objective is complete immediately after the final hit. Some objectives require a confirmation delay, a return trip, or an additional interaction before progress is recorded.
Use the following combat preparation checklist:
- Confirm that the correct target or area is active.
- Restore health before entering the objective zone.
- Keep a retreat path available.
- Avoid spending rare resources on minor enemies.
- Recheck the objective tracker after the encounter.
- Leave only after the game confirms the next stage.
The safest build or loadout depends on the objective’s conditions. A high-damage setup can shorten a fight, while a defensive setup may be better for survival tasks. Mobility is valuable when carrying items or avoiding attacks, but it should not replace basic preparation.
Exploration, Collection, and Interaction Tasks
Exploration objectives often appear simple because the destination is visible. The challenge usually comes from finding the exact interaction point, locating an item that is slightly off the main route, or recognizing that the objective has multiple stages.
Search each marked area in a consistent pattern. Start at the entrance, inspect the main path, check side rooms, and then examine elevated or hidden corners. If an item is not visible, move close to objects that could conceal an interaction prompt. Do not repeatedly search the same location without checking whether the objective state has changed.
| Search Area | What to Check | Useful Habit |
|---|---|---|
| Main route | Doors, containers, signs, and marked objects | Follow the objective marker first |
| Side paths | Dead ends, corners, and alternate rooms | Search after the main route |
| Upper levels | Stairs, platforms, balconies, and ledges | Look above the normal camera line |
| Return zone | NPCs, drop points, and delivery markers | Revisit after collecting the item |
| Previous location | Original interaction point | Check if the tracker does not update |
If an objective seems stalled, move directly beside the marked object, face it, and look for a prompt. Some interactions require a precise position instead of simply entering the correct area.
Collection tasks deserve extra caution. Carrying an item can change your priorities because combat, falls, resets, or leaving the objective zone may interrupt the task. Clear the route before collecting whenever possible. If the game allows you to abandon or drop the item, learn how recovery works before taking a risky shortcut.
When an objective includes both collect and deliver, treat delivery as a separate mission stage. After picking up the item, pause and check the new marker. The destination may change, and returning to the original location may not complete the task.
Objective Tracking and Troubleshooting
A clear tracking routine helps distinguish a difficult objective from an objective that has not registered correctly. First, reread the description and identify the exact condition that remains incomplete. Next, return to the most recent interaction point and repeat the required action. Finally, leave and re-enter the area only if the game’s normal progression allows it.
| Problem | Likely Cause | Recommended Fix |
|---|---|---|
| Marker does not appear | Objective stage is not active | Review earlier tasks and confirm prerequisites |
| Target defeat is not counted | Wrong target or incorrect mode | Match the target description exactly |
| Item cannot be delivered | Destination changed after pickup | Follow the updated marker |
| Interaction prompt is missing | Position or facing is incorrect | Stand closer and adjust your view |
| Progress resets | Area was left or run ended early | Repeat the stage while staying on route |
Do not abandon a working run just because the tracker updates slowly. Allow a short moment for the completion message, then revisit the final interaction point before restarting the entire objective chain.
Objective Completion Checklist:
- Read every condition in the active objective
- Identify the destination and return point
- Prepare health, equipment, and an escape route
- Complete the required action without unnecessary detours
- Confirm the tracker updates before leaving the area
If progress still does not register, use a controlled troubleshooting sequence:
- Confirm that the objective is selected and active.
- Check whether a prerequisite objective remains incomplete.
- Repeat the exact interaction or defeat condition.
- Return to the most recent marker.
- Restart only after the normal in-game checks fail.
This method avoids wasting attempts and makes it easier to identify which condition is preventing completion.
MM2 of The Locust Objectives FAQ
Q: What is the best way to start MM2 of The Locust objectives?
Begin by reading the complete objective text, identifying the destination, and separating the task into action and return stages. Nearby interaction objectives are usually good starting points because they require less travel and help establish the local route.
Q: Why did my objective not complete after defeating the target?
The target may not match the objective condition, or the mission may require a return interaction after combat. Check the tracker, revisit the marked area, and confirm whether a final prompt or delivery step is still active.
Q: How should I handle collection objectives?
Search the marked area systematically, clear dangerous routes before picking up the item, and follow the updated destination after collection. Avoid unnecessary combat or shortcuts while carrying the objective item.
Q: What should I do when an objective marker disappears?
Review the previous objective stage and check whether a prerequisite was missed. If the task is active, revisit the last interaction point and inspect nearby side paths, upper levels, and return locations.
Keep one active route in mind, confirm every stage, and prioritize reliable completion over risky speed. That approach makes objective chains easier to learn and repeat.
The strongest objective routine is simple: read, prepare, route, complete, and confirm. Apply that sequence to location tasks, combat missions, collection runs, and survival challenges. As the objective list changes or new content is added, the same process remains useful because it focuses on conditions rather than assumptions.